Forumrules To achieve meaningful questions, we apply the following rules: • First, read the manual; • Check if your question has been asked previously; • Try to ask your question as clearly as possible; • Did you already try to solve the problem? Please mention this; • Is your problem solved by a visitor then let him/her know in this forum; • To give a response to a question or answer, do not use this form but click on the button 'reply to this question'; • Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Enjoy the delightful lifestyle products for your home. See the smoke alarms, enjoy the design by Jacob Jensen. Download user manuals. Don’t let those boring modern doorbell designs bore you. Find out what elegant bells are all about in this Wireless Jacob Jensen Doorbell.

Today we are going to talk about one of my favorite products the Jacob Jensen Wireless Doorbell from. We are going to discuss what is included, then getting setup, and finally installation. The receiver uses 6 AA batteries. Alternately you could use a 6 volt power adapter, which can be found in most local electronic stores.

The push buttons battery is pre-installed in the unit. The battery compartment, as well as the dip switches for programming, are covered by a back plate that is held in place by four screws; this helps water seal your push button.

A plastic pull tab has been added to insure your battery does not drain until you are ready to use it. Please remove the tab once that is done your Jacob Jensen push button will be active and ready to use! Free Download The Game Farkle Rules Programs That Help. Before you can install your doorbell you will need to program the push button to the receiver and choose your melody. This is done with a series of dip switches. By setting the 4 switches to a unique pattern you can make sure that you are not receiving interference from any other products.

Most people will simply choose all up or all down. The melody is chosen by sliding the 5 position switch to the corresponding number. By choosing the melody on the push button you can have multiple push buttons without having to have the same melody for all of them. Saints Row 4 Main Menu Theme Скачать there. Programming the receiver to the push button is just as easy. Change the four dip switches in the receiver's battery compartment to same direction as the ones on the push button.

You may do this with as many receivers as you want; allowing your chimes to receive the same signal from all the push buttons in your network at the same time. The receiver also features a volume control, hi low or off, and on/off switch for the led light on the front of the receiver. Now you are ready to install your new doorbell!

After you have reattached the battery cover you can hang the back plate to any surface using the screws provided or your own. The push button will then slide onto the back plate and firmly attach to the wall. Using a back plate allows you to easily remove the push button to change the frequency, melody, or battery. The receiver can sit on a table or be hung on the wall by using the included hardware.

And that is the basic setup of our Jacob Jensen Wireless Doorbell. For more information on this product please visit.